Tweet
SeaPerch-Trainer Is it acceptable to use a battery with less than 12vdc? Say a 2s lipo which charges to 8.4vdc but has a nominal voltage of 7.4vdc. or would a 3s lipo be acceptable as it's nominal voltage is 11.1vdc, although it's max charge is 12.6vdc? I've attached a link about lipo batteries that does explain nominal voltage. I've also looked and the stock 12v batteries are 12vdc nominal and ~14.1v max. Thanks!
-
Here's the correct link: https://rogershobbycenter.com/lipoguide -
CJay From the rules; "Team supplied batteries must not be larger than 6.5” long x 3” wide x 4” high and must be 12 VDC with a maximum of 9 amp hour rating." Lower voltage is acceptable, 9 amp hour rating is maximum. Yes, the charge voltage is higher on all batteries, and that is not a problem. We did not state that there is a restriction on the type of battery, but please make sure the students know how to safely handle lithium batteries.Comment
-
Another battery question, the team is looking into putting a battery inside the ROV and just doing serial controls from the poolside. I know the ROV unit with battery must be waterproofed etc but is that allowed?Comment
-
-
Can they use the attached battery/power supply. Plan is to put in a water proof enclosure with waterproof connectors to the pool deck controller. Sorry to nuke it out but want to make sure before the kids dive in the deep end.Comment
-
Comment