Announcement

Collapse
No announcement yet.

Gate and Buoys drawings

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gate and Buoys drawings

    Here are the drawings for the gate and the buoys.

    Let me know if you have any questions or concerns .
    Attached Files
    Last edited by Daveman; 03-19-2019, 08:05 AM. Reason: changed title

  • #2
    Hey Dave,

    This is Andrew from CSULA AUV and I just have a quick question.

    For the buoys how thick are the pipes that are in the drawings? They seem to be an inch thick but i would rather be sure than assume.

    Thanks!

    Comment


    • #3
      My goto size is 1/2" PVC pipe. So the frame for the buoys are 1/2" PVC pipe. I'll try to remember to mark everything in the future, but if I don't, it's probably 1/2"

      Comment


      • #4
        Dave,
        1. How are the three sides of the buoy held together, zip ties?
        2. What material are the surfaces of the buoy made of? Including thickness?
        3. How will the images be "applied to the surface material"? Are you laminating? applying a vinyl print?

        Comment


        • #5
          1. zip ties are my goto for holding things together
          2. The backing is 4mm corrugated plastic.
          3. the Images will be printed on a vinyl banner and taped to the corrugated plastic

          Comment

          Working...
          X